Install GNOME GMail Notifier

You can download and install it from GNOME GMail notifier home page or just use yum

[root@fedora ~]$ yum install gnome-gmail-notifier

Launch Gmail Notifier

If installation was successful, go to Applications -> Internet -> Gmail Notifier.

Open Preferences

Right click on Email icon in taskbar and click Preferences.

Select Preferences

Set inbox update time to 1 minute. Check display notifications for new messages and errors. Also select a sound to play for new mails.

Add GMail Account

Click Add on preferences window and add your GMail account.

Add Mail Account (Google Apps) (Optional)

If you don’t know what Google Apps is, leave this step. If you do know, then add your mail account.

Check Mail

If you can’t wait for 1 minutes to see GMail Notifier in action, just right click on email icon in taskbar and click Check Mail.

Mail Notifications

Whenever you get a new mail, you’ll have bubble like the one in image below and a sound will also be played.

Enjoy the notifications

We offer all kinds of certification exams including MB4-219 and MB6-203 certifications. Our guaranteed MB6-822 are freely accessible all around the world of 70-181 with 70-291.

Step 1: Installing Vncviewer, Vncserver

As root do this

[root@bordeaux saini]# yum install vnc [Enter]

Step 2: Configuring resolution, port & user

The default location of server configuration file for vncserver is ‘/etc/sysconfig/’. To configure the resolution, user and port open ‘/etc/sysconfig/vncservers’ in you favorite editor and add two lines per user configuration shown ..

VNCSERVERS=":"
VNCSERVERARGS[]="-geometry x x"

Example :

VNCSERVERS="3:saini"
VNCSERVERARGS[3]="-geometry 1000x700"

You can choose any display port, but it should not be in use by another X server. Window height and width can be anything (not in fraction of course). But keep in mind that the system on which you are going to view the desktop using vncviewer should have greater resolution than what you specify here, otherwise scrollbars will appear.

Step 3: Configuring Desktop Environment

The user specific configuration files of vncviewer resides in ‘.vnc’ directory in user’s home directory. (e.g. ‘/home/saini/.vnc/’). Open ‘.vnc/xstartup’ in your favorite editor and edit as below

• For Gnome

The ‘xstartup’ file shout look like this

#!/bin/sh

# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc

[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
#xsetroot -solid grey
#vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
#twm &
startx &

• For KDE

The ‘xstartup’ file should look like this

#!/bin/sh

# Uncomment the following two lines for normal desktop:
#unset SESSION_MANAGER
#exec /etc/X11/xinit/xinitrc

[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
#xsetroot -solid grey
#vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
#twm &
startkde &

Step 4: Configuring password

For setting up vncviewer password for user ‘xyz’, login as user ‘xyz’ and issue ‘vncpasswd’ command on a terminal/konsole (or whatever). Enter password twice and you are done with password setting.

Step 5: Starting Vncserver

To start vncserver, login as root and issue ‘service vncserver start’ command. If service started successfully, you are ready to use vncviewer on a remote/local machine.

Step 6: Accessing through Vncviewer

• From Linux based machines

[saini@bordeaux saini]# vncviewer IP_Address:displayPort [Enter] #(IP Address is for the machine where you set up vncserver)

• From Windows

On windows there is a software called RealVnc. Install it and enter <IPAddress>:<displayPort> in the dialog box.
[I explained how to connect via windows because it may help someone get a bit of relief.]

Screenshots:

• Vncviewer with Gnome as Desktop environment

• Vncviewer with KDE as Desktop environment

Vnc is nice tool if you want to avoid using windows. I use it all the time. While I am forced to work on windows system, I install vncviewer and use it in full screen mode It also helps when you want to run some gui based application and monitor is remotely. Because if you close vncviewer window and use vncviewer again, you will be given the desktop session where you left it (all windows open and applications running).

We offer guaranteed success in MB4-349 exams with help of latest MB6-205 and MB7-221 .The exams of 70-236 and 70-294 can be passed very easily.

First of all, I would like to say that The artwork team at Fedora has done a very fantastic job. The graphics right from installation up to the desktop are just awesome. Especially the default background is very nice. Here is shot of the default Gnome Fedora 8 Desktop.

Right after the installation, I fetched the nVidia proprietary drivers from here and installed them. And those were installed successfully without giving any errors or problems. [ If you want a complete howto on installing nvidia drivers. Its here.] A reboot after the installation and compiz worked out of the box. Here is shot.

Ok, graphics done. What now ? I just realized that there is no mp3 support. No worries. Codeina aka Codec Buddy is there. Just issue ‘codeina’ command from command line and a window like this will appear.

Check Fluendo MP3 Audio Decoder and click get selected, accept the license conditions and you’ll see that codeina is fetching the codecs. [If codeina does not fetch codecs or give error like timeout or some other network error. Try checking your proxy setting in System -> Preferences -> Internet And Network -> Network Proxy . It may help. ]

Ok. Now, codeina has done the job. Lets play some mp3. Note that amarok still can’t play mp3 files because it uses xine engine. So, you can choose either Totem or Rhythmbox to play your mp3 files. Here is a shot of Rhythmbox. So, Codeina also works out of the box.

Another major improvement in Fedora 8 in audio section is introduction or pulseaudio. Issue command ‘pulseaudio’ from command line and you will see a window like this.

You can control the sound stream from different players or whatever. You can mute individual streams and can even set the default devices for certain streams through this fantastic gui.

Another good thing in Fedora 8 is Eclipse. Eclipse 3.3 is back in Fedora 8. They excluded it from Fedora 7. I am happy to see it back here in Fedora 8.

Another utility that I found helpful is Remote Desktop utility. Launch System -> Preferences -> Internet And Network -> Remote Desktop and you’ll see a window like this.

Set your preferences and now you can browse your desktop from anywhere using ‘vncviewer <yourIP>:0’. Though one call always configure vncserver to get that done. But for newbies it’ll be a great help.

Also, My wireless lan card, Ralink rt2500 WNC-0301 is detected successfully in Fedora 8. But I am not sure whether it works or not, because there is not wifi environment in my lab and I can’t check it without that. [ Anyway if your wifi card doesn’t work, here is a howto on installing Ralink rt2500 WNC-0301 using drivers from serailmonkey. ]

Another improvement is that cursor was never invisible. Up to Fedora 7, I suffered cursor invisible problem on first login. [ If you are facing the same problem, add line

Options "HWCursor" off

to “screens” section in your /etc/X11/xorg.conf file and issue ‘gdm-restart’ command. It’ll be fine afterwards. ]

The boot time has also improved significantly. My Fedora 8 boots in just 45 seconds.

These Fedora 8 Screenshots and other related to Fedora 8 can be reached here.

I am happy to see that eclipse will be back in Fedora 8. Also, Fedora 8 comes with codecBuddy which will help to guide people to use free alternatives of audio/video codecs. A better network support is guaranteed for sure Also, developes are trying to limit the use of desktop environment as root. In Test 3 if you try to login as root, the gdm will display a warning.

If you want to browse complete feature list for Fedora 8 Test 3, it is available here.

More about Fedora 8 Test 3 in pictures below or you can browse these pictures here.

PS1 : Waiting for 8th November eagerly.