Though the pcs in the labs are not having any support for applications except terminal or command line, Linux version of yahoo messenger can be opened there. This is a step by step procedure.
Step 1
Open two terminals and through one of them logon on to your mirage server account because that supports the Gaim(Linux version of yahoo messenger).
Step 2
Now I will call the terminal in which you are logged into mirage as remote machine and the terminal of the machine at which you are working as local machine.
At your local machine execute these commands.
1
2
| [kulbir@localhost ~] xhost + [Enter]
access control disabled, clients can connect from any host |
[kulbir@localhost ~] xhost + [Enter]
access control disabled, clients can connect from any host
The messege displayed above should appear otherwise you may have problems.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
| [kulbir@localhost ~] /sbin/ifconfig [Enter]
eth0 Link encap:Ethernet HWaddr 00:11:2F:57:C5:9D
inet addr:372.12.226.25 Bcast:122.12.226.123 Mask:212.223.345.138
UP BROADCAST RUNNING MULTICAST MTU:1520 Metric:1
RX packets:136851 errors:0 dropped:0 overruns:0 frame:0
TX packets:82928 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:71106959 (67.8 Mb) TX bytes:40997603 (39.0 Mb)
Interrupt:10
lo Link encap:Local Loopback
inet addr:122.4.4.1 Mask:252.2.2.1
UP LOOPBACK RUNNING MTU:11436 Metric:1
RX packets:46123 errors:0 dropped:0 overruns:0 frame:0
TX packets:46123 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22001021 (20.9 Mb) TX bytes:22001021 (20.9 Mb) |
[kulbir@localhost ~] /sbin/ifconfig [Enter]
eth0 Link encap:Ethernet HWaddr 00:11:2F:57:C5:9D
inet addr:372.12.226.25 Bcast:122.12.226.123 Mask:212.223.345.138
UP BROADCAST RUNNING MULTICAST MTU:1520 Metric:1
RX packets:136851 errors:0 dropped:0 overruns:0 frame:0
TX packets:82928 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:71106959 (67.8 Mb) TX bytes:40997603 (39.0 Mb)
Interrupt:10
lo Link encap:Local Loopback
inet addr:122.4.4.1 Mask:252.2.2.1
UP LOOPBACK RUNNING MTU:11436 Metric:1
RX packets:46123 errors:0 dropped:0 overruns:0 frame:0
TX packets:46123 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22001021 (20.9 Mb) TX bytes:22001021 (20.9 Mb)
The address against inet_addr in 3rd line is the IP address of your local machine.
Step 3
Now switch to your remote machine terminal and issue the following commands…
[kulbir@server ~] export DISPLAY=[IP address]:0.0 [Enter] |
[kulbir@server ~] export DISPLAY=[IP address]:0.0 [Enter]
e.g.
[kulbirsaini@server ~] export DISPLAY=222.26.36.5:0.0 [Enter] |
[kulbirsaini@server ~] export DISPLAY=222.26.36.5:0.0 [Enter]
If no error comes, means things are going fine.
[kulbir@server ~] xterm [Enter] |
[kulbir@server ~] xterm [Enter]
Now also if no error comes and a new teminal appears then you are ready to open the gaim.
Issue this command on the new appeared terminal
[kulbir@server ~] gaim [Enter] |
[kulbir@server ~] gaim [Enter]
yahoo messenger will appear and now you are ready to chat.
Add your account to the messenger and chat 😀