ATI Catalyst 10.2 Proprietary Linux x86 Display Driver

And yes, lets wait for next version of ATI Drivers

Are you interested in MB4-218 certification?Get our self paced MB6-202 and MB6-820 practice questions and 70-178 study packages to pass your exam without any intricacy in 70-290.

ATI Catalyst 10.1 Proprietary Linux x86 Display Driver

I really hope that things turn out well and you don’t really get to this point. But if these drivers don’t work for you, proceed to the post Fedora 12 ATI Catalyst Drivers and checkout mesa-dri-drivers-experimental.

From the release notes for version 10.1,

Resolved Issues

• [ATI CatalystTM Control Center] Display Manager Properties tab now properly shows a single mode instead of multiple modes when big desktop mode is enabled.
• The operating system will no longer fail when switching between virtual desktops.
• [RHEL 5.4 32-bit] [ATI CatalystTM Control Center] System now functions properly after selecting “Detect Displays” button and hot-plugging a HDMI display.
• [Ubunut 9.10] X no longer fails after executing multiple Xserver generations with Xinerama enabled.
• Hotplugging a HDMI monitor or toggling between LCD and HDMI no longer causes the system to stop responding.

Know Issues

• [RHEL4-U8 32-bit] Corruption may be observed while starting Xserver on some ASICs.
• Corruption may be observed after 90, 180 or 270 degree desktop rotation on some ASICs.
• System may stop responding after switching to DC (battery) mode with CrossFireTM enabled and full-screen applications running.
• System may become unresponsive after executing specific combinations of XRandR reflections and rotations.
• The output log file may report the Engine Clock or Memory Clock values as 0 MHz on some systems.
• [RHEL 5.4][ ATI CatalystTM Control Center] Applying customized TV modes might not work properly, pop up message requesting restart will not appear and customized format will not apply.
• [Ubuntu 9.04 x86 64-bit] Some systems may become unresponsive during video playback with certain Dual Head configurations.
• [ATI CatalystTM Control Center] Specific customized modes under the HDTV page may fail to apply on some systems.
• [Ubuntu 9.04] With one DP monitor and one DVI monitor connected in clone mode, unplugging and re-plugging the DVI monitor may cause the system to deadlock.
• Xserver may fail to launch after enabling CrossFireTM and restarting on some ASICs.
• [ATI CatalystTM Control Center] Super Anti-Aliasing (16x) mode may not be available on some display adapters with CrossFireTM is enabled.
• Display rotation may fail to apply from ATI CatalystTM Control Center with desktop effects enabled.
• [RHEL] Enabling Xinerama may cause input devices (keyboard and mouse) to become inaccessible after restarting Xserver.
• System may fail to return to console mode after enabling all adapters and exiting Xserver for multi GPU configuration on some ASICs.
• ATI CatalystTM Control Center may report error when two displays of different maximum resolutions are set in clone mode.
• [SUSE 11.1 64-bit] Enabling CrossFireTM might fail with some ASICs
• Scaling setting changes may fail to retain after mode change, reboot or restarting Xserver.
• [SUSE 11.2 x86] CrossFireTM might not be functional under specific configurations
• [Ubuntu 9.10] CAL test “completemodulelist.txt” might not execute and throws segmentation fault.
• [ATI CatalystTM Control Center] Some systems may intermittently stop responding when changing the scaling options.
• [ATI CatalystTM Control Center] Applying “Size and Position” adjustments for Analog Monitors might not work properly.
• [Ubuntu 9.04] Some video cards may stop video output signals when monitor has been powered off.
• [ATI CatalystTM Control Center] Disabled display will become enabled after Xserver restart.
• Flickering corruption might be visible while running OpenGL applications with CrossFireTM enabled on specific ASICs.

You can easily check out our best quality MB4-213 which prepare you well for the real MB5-856 exam. You can also get success in real MB6-818 exam with the quality 70-169 and 70-272.

ATI Catalyst 9.12 Proprietary Linux x86 Display Driver

Also, if these drivers doesn’t work, a lot of people are finding mesa-drivers-experimental a huge success over catalyst drivers. Don’t miss those experimental drivers. Checkout comments on Fedora 12 ATI Catalyst Drivers.

Anyway, let us know whatever works for you

But Fedora 12 tries to make life a bit easier and may provide support for ATI cards. From Fedora 12 Announcement

Fedora 12 introduces experimental 3D support for AMD Radeon HD 2400 and later graphics cards. To try it out, install the mesa-dri-drivers-experimental package. On many cards, this support should allow desktop effects to be used.

What to do?

Step 1 : Try ATI Catalyst Drivers from AMD

Nobody, so far, has reported the successful installation of ATI Catalyst drivers on Fedora 12. But still if you want to give it a shot (because the uninstall is clean and doesn’t leave a trace of ATI drivers in your system), you can follow How To: Install ATI Catalyst (fglrx) Drivers. If it doesn’t work, just uninstall using the command given at the end of the post.

Step 2 : Try mesa-dri-drivers

Keep in mind that these are experimental drivers and may not work properly or may work partially.

Install the mesa-dri-drivers-experimental from Fedora repositories using Yum.

[root@fedora ~]# yum install mesa-dri-drivers-experimental

Reboot if the drivers are install successfully.

Let me know, if any of the above drivers work for you

ATI Catalyst 9.9 Proprietary Linux x86 Display Driver

Note1 : Installation Process : How To: Install ATI Catalyst (fglrx) 9.8 Drivers on Fedora 11.
Note2 : Dual Display Configuration : How To: Configure Dual Display with ATI Radeon (fglrx).

FAQs

Q. What is Fedora?
A. The Fedora Project page describes it in a short and nice way!

Q. I want to know everything about Fedora 12. Where do I find it?
A. You are probably asking for Fedora 12 Release Notes.

Q. Will it work on my machine?
A. What do you have? A server/desktop/laptop/netbook/xo/some-alien-hardware! It’ll work if your machine satisfies the hardware requirements.

Q. I have been using Fedora since long. What are the new features in Fedora 12?
A. Please browse Fedora 12 : Constantine Feature List page.

Q. Ok. I am convinced. From where can I download Fedora 12?
A. Nice! Please visit Download Page for download options. Checkout torrents or select mirror from Fedora mirrors.

Q. No. I don’t want that regular DVD. Do you have something different to offer?
A. Yup! Spins community is doing a wonderful job! Chose one from KDE, LXDE, XFCE, BrOffice, FEL, Games and Edu spins.

Q. I have downloaded the Fedora ISO. How do I install it?
A. There are different ways in which you can install Fedora on your system.

1. If you don’t have CD/DVD drive, you can follow How To: Install Fedora without CD or DVD.
2. You can install Fedora using a USB drive. Checkout LiveUSB creator.
3. You can follow the traditional way. Install using CD/DVD.

Q. I already have Fedora installed on my system. Should I upgrade or re-install?
A. Browse Upgrading Your Current System page and find out yourself.

Q. I think I want to upgrade my Fedora 11 system to Fedora 12. How do I do it using Yum?
A. Learn how to do it from the Yum Guru himself Yum upgrading to fedora 12 from fedora 11 or browse this page on Fedora Docs.

Q. I have ATI graphics card. How do I install Catalyst Display Drivers?
A. Follow How To: Install ATI Catalyst (fglrx) Drivers.

Q. Hey, I am stuck! I need some help. Where should I ask?
A. There are different ways like Real Time Support via IRC, mailing lists, forums etc. in which you can get help on topics related to Fedora. Browse Get Help page to checkout different methods.

Q. I like this Fedora thing. Can I help?
A. There are several ways in which you can help Fedora Project. The simplest way is to help others! Other methods can be ‘Write Documentation’, ‘Design for Fedora’, ‘Spread the Word’ or ‘Write Code’ Checkout Join Fedora page.

You can join us for best MB5-845 exam and MB6-295 solutions. Our MB7-232 contains all those materials you want to pass for real 70-290 and 70-177 exam.

ATI Catalyst 9.9 Proprietary Linux x86 Display Driver

Note1 : The installation process is same as version 9.8 and can be access at How To: Install ATI Catalyst (fglrx) 9.8 Drivers on Fedora 11.
Note2 : If you want to configure dual display follow How To: Configure Dual Display with ATI Radeon (fglrx).

Subscribe for MB5-855 training sessions to guarantee pass MB6-507 exam. Also get download link MB7-838 for the next exam, after getting success in 70-293 and 70-181 ,you can find a wonderful job.

Hardware Used

Graphics Card: ATI Radeon HD 3200 (256MB, onboard)
Monitor 0: ViewSonic VG1930WM 1440×900 (19″ LCD, Connected via DVI port)
Monitor 1: Samsung SyncMaster 793S 1280×1024 (17″ CRT, Connected via VGA port)

Types of Dual Display

• Mirror: Both screens have same content, identical refresh rate and resolution.
• Clone: Both screens have same content but refresh rates and resolutions can be different.
• Horizontal: Both screens can have different content, refresh rates and resolution. Screen 1 is left or right of Screen2.
• Vertical: Same as horizontal. The only difference is that Screen1 is above or below Screen2.

In this post, we are interested in Horizontal setup with xinerama on. This way we can have two desktops allowing full screen modes on both of them and allowing us to drag and drop windows from one screen to the other.

Install ATI Drivers

If you don’t have ATI drivers installed already, follow this How To: Install ATI Catalyst (fglrx) Drivers on Fedora 11 (works for any version of ATI Catalyst drivers).

Generate xorg.conf file

If you don’t see the xorg.conf file at /etc/X11/xorg.conf, then you need to generate it to proceed to next step. Use the following command as root to generate one

[root@fedora ~]$ Xorg -configure

This command will generate the default xorg.conf file at /root/xorg.conf.new. Copy it to /etc/X11/xorg.conf.

[root@fedora ~]$ cp /root/xorg.conf.new /etc/X11/xorg.conf

Backup xorg.conf file

Backup your original xorg.conf file so that you can restore it in case the configuration doesn’t work the way you expected.

[root@fedora ~]$ cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup

Generate Configuration for Dual Display

Now we are ready to generate the configuration for dual display. Use the following command with appropriate arguments (in accordance with your hardware configuration)

# --screen-layout will place second screen on left of your first screen. Other possible values are right,above,below.
# --xinerama=on option enables you to have two different desktops and one of them being passive.
# You can drag and drop windows from one desktop to the other. Task bars appear only on one of the desktops.
[root@fedora ~]$ aticonfig --initial=dual-head --screen-layout=left --xinerama=on
# --resolution=_screen_number_,widthxheight
[root@fedora ~]$ aticonfig --resolution=0,1440x900 --resolution=1,1280x1024
# Set horizontal sync and vertical refresh rates for both monitors.
[root@fedora ~]$ aticonfig --hsync=0,30-60 --hsync=1,30-60 --vrefresh=0,30-60 --vrefresh=1,30-60

You can download my xorg.conf file via this link.

Reboot or Logout and Login Again

If you just setup your ATI drivers and configured the dual display, you need to reboot so that fglrx module can be loaded properly. If you rebooted after setting up the drivers, just logout and login again to checkout your dual display If everything works fine, say thanks to me and if not blame ATI

Adjust DPI for Normal Font Size

I faced a problem with my font sizes being too big while using xinerama. It was easy to fix by adjusting DPI. Go to System -> Preferences -> Appearance. Go to Fonts tab. Click Details located near the bottom right corner. On that window, try descreasing the “Dots Per Inch” value. Mine worked fine with 85 DPI.

Below is an image of my dual display setup. Click to enlarge.

Are you looking for MB4-217 and MB5-858 exams help? You can download our MB6-819 and 70-177 to pass your real 70-284 exam.

ATI Catalyst 9.9 Proprietary Linux x86 Display Driver

Note : The installation process is same as version 9.8 and can be access at How To: Install ATI Catalyst (fglrx) 9.8 Drivers on Fedora 11.

Get your MB6-202 and MB6-819 certifications within days using latest MB7-841 and 70-299 and 70-237 resources of certifications; you can get a wonderful job.

A few days back I was designing the new logo for Videocache in Inkscape. After finishing the design, I saved the svg file carefully. And deleted other images which I embedded in the logo. A few moments later I realized that I just screwed up myself by deleting all those files as the svg file is now good for nothing.

I searched a lot on recovering files in Linux but in vain. Then a friend (bitgeek) told me about Photorec. I managed to recover all the files using photorec. I thought it would be a good idea to let others know and spread a good word about Photorec. Below is a step by step howto on using Photorec to recover your files.

What is Photorec?

From Photorec website,

PhotoRec is file data recovery software designed to recover lost files including video, documents and archives from Hard Disks and CDRom and lost pictures (thus, its ‘Photo Recovery’ name) from digital camera memory. PhotoRec ignores the filesystem and goes after the underlying data, so it will still work even if your media’s filesystem has been severely damaged or re-formatted.

For This HowTo

Lets say I had a file download_arrow.png in /home/saini/Desktop which I have removed accidentally. Login as root and create a directory recover which will be used to store all the recovered files.

Install testdisk/PhotoRec

Photorec comes as a part of testdisk package in Fedora (I hope its same for other distributions as well). Use yum to install testdisk.

[root@fedora-tips ~]$ yum install testdisk

Launch Photorec

Once you are done with installation. Open a terminal and launch photorec (as root).

[root@fedora-tips recover]$ photorec

Select Hard Disk

If you have more than one hard disk in your system, select the one from which you have deleted the file(s).

Select Partition Type

If your hard disk has Linux partitions, then select [Intel].

Select Filetype Option

Move to [File Opt] and press enter. Here you can disable all file types by pressing ‘s’ . Use space to toggle the check button. Now since we removed a png file, we are going to check only png file type.

Select Options

Photorec also has a list of different options. Under normal circumstances you don’t need to modify them

Select Partition

Move the selector to the partition from which you have removed the file. Then press enter on search.

Select Filesystem Type

If you are using Linux, its going to be ext2/ext3/ext4. So the default selection is file.

Select Space for Analysis

Select free if you didn’t write to that partition after removing the particular file otherwise select whole.

Select a Directory to Recover Files

Now select the path where the recovered files will be stored. Then press ‘Y’.

Recovery Progress

Photorec will show how many files it has recovered.

All recovered file will be stored in the directory selected above. Open them in a file browser and you’ll get the removed file there. I hope this howto will help you recovering files you accidentally delete

Unlike scam MB6-204 and MB6-822 training program, our best MB7-843 and 70-400 online training courses provide you quick success in first try of 70-241.