News: ATI Catalyst Drivers 10.2 Released. No Fedora 12 Support.

After almost a month, ATI has come up with a new version 10.2 of its Catalyst (fglrx) drivers. The drivers can be download from ATI Catalyst™ 10.2 Proprietary Linux x86 Display Driver Page. As AMD is famous for doing nothing but just incrementing versions of there software, even this version doesn’t support xorg-1.7.4. But if you still want to give it a try, you can download and try installing the driver. Otherwise mesa-experimental drivers are your friend. Checkout the post Fedora 12 and ATI Drivers and save yourself from frustration :)

And yes, lets wait for next version of ATI Drivers :)

 

News : ATI Catalyst Drivers 10.1 Released. Test them now!

After a long, really long wait, AMD has released the next version 10.1 of its ATI Catalyst display drivers (fglrx) for Linux. The drivers can be download from ATI Catalyst™ 10.1 Proprietary Linux x86 Display Driver Page. As previous version turned out to be a big turn off for Fedora community and AMD took a long time for releasing this, I hope they have fixed issues regarding new Xorg version. Fedora folks will really want this version to work, otherwise there will be *blood* 😀 You have got AMD graphics card? What are you waiting for? Download the drivers immediately and test the damn thing! And please let everyone know whether it works for you with details of your graphics card. You know where the howto for installation is ;) How To: Install ATI Catalyst (fglrx) Drivers.

I really hope that things turn out well and you don’t really get to this point. But if these drivers don’t work for you, proceed to the post Fedora 12 ATI Catalyst Drivers and checkout mesa-dri-drivers-experimental.

From the release notes for version 10.1,

Resolved Issues

  • [ATI CatalystTM Control Center] Display Manager Properties tab now properly shows a single mode instead of multiple modes when big desktop mode is enabled.
  • The operating system will no longer fail when switching between virtual desktops.
  • [RHEL 5.4 32-bit] [ATI CatalystTM Control Center] System now functions properly after selecting “Detect Displays” button and hot-plugging a HDMI display.
  • [Ubunut 9.10] X no longer fails after executing multiple Xserver generations with Xinerama enabled.
  • Hotplugging a HDMI monitor or toggling between LCD and HDMI no longer causes the system to stop responding.

Know Issues

  • [RHEL4-U8 32-bit] Corruption may be observed while starting Xserver on some ASICs.
  • Corruption may be observed after 90, 180 or 270 degree desktop rotation on some ASICs.
  • System may stop responding after switching to DC (battery) mode with CrossFireTM enabled and full-screen applications running.
  • System may become unresponsive after executing specific combinations of XRandR reflections and rotations.
  • The output log file may report the Engine Clock or Memory Clock values as 0 MHz on some systems.
  • [RHEL 5.4][ ATI CatalystTM Control Center] Applying customized TV modes might not work properly, pop up message requesting restart will not appear and customized format will not apply.
  • [Ubuntu 9.04 x86 64-bit] Some systems may become unresponsive during video playback with certain Dual Head configurations.
  • [ATI CatalystTM Control Center] Specific customized modes under the HDTV page may fail to apply on some systems.
  • [Ubuntu 9.04] With one DP monitor and one DVI monitor connected in clone mode, unplugging and re-plugging the DVI monitor may cause the system to deadlock.
  • Xserver may fail to launch after enabling CrossFireTM and restarting on some ASICs.
  • [ATI CatalystTM Control Center] Super Anti-Aliasing (16x) mode may not be available on some display adapters with CrossFireTM is enabled.
  • Display rotation may fail to apply from ATI CatalystTM Control Center with desktop effects enabled.
  • [RHEL] Enabling Xinerama may cause input devices (keyboard and mouse) to become inaccessible after restarting Xserver.
  • System may fail to return to console mode after enabling all adapters and exiting Xserver for multi GPU configuration on some ASICs.
  • ATI CatalystTM Control Center may report error when two displays of different maximum resolutions are set in clone mode.
  • [SUSE 11.1 64-bit] Enabling CrossFireTM might fail with some ASICs
  • Scaling setting changes may fail to retain after mode change, reboot or restarting Xserver.
  • [SUSE 11.2 x86] CrossFireTM might not be functional under specific configurations
  • [Ubuntu 9.10] CAL test “completemodulelist.txt” might not execute and throws segmentation fault.
  • [ATI CatalystTM Control Center] Some systems may intermittently stop responding when changing the scaling options.
  • [ATI CatalystTM Control Center] Applying “Size and Position” adjustments for Analog Monitors might not work properly.
  • [Ubuntu 9.04] Some video cards may stop video output signals when monitor has been powered off.
  • [ATI CatalystTM Control Center] Disabled display will become enabled after Xserver restart.
  • Flickering corruption might be visible while running OpenGL applications with CrossFireTM enabled on specific ASICs.
 

Red Hat Launches OpenSource.Com

Well, OpenSource is more or less about software source code and technology specific but OpenSource.Com scales beyond software and technology and provides a platform to discuss/learn/get involved/share.

From the website,

What problems can we solve? How would it affect the way we learn? Work? Run our governments?

We want to shine a light on the places where the open source way is multiplying ideas and effort, even beyond technology. We believe that opensource.com will be a gathering place for many of the open source stories we’d like to share–through articles, audio, web presentations, video, or open discussion.

Currently website has following five channels,

For more information, visit following links

If you want to participate, please visit How to participate?

 

News: Will ATI Catalyst Drivers 9.12 work with Fedora 12?

AMD has released the next version 9.12 of its ATI Catalyst display drivers for Linux. The drivers can be download from ATI Catalyst™ 9.12 Proprietary Linux x86 Display Driver Page. As of now, I haven’t tried the drivers on Fedora 12 because supposedly my SMPS is broken :( But since there were a whole lot of bug reports to AMD regarding xorg 1.7 and catalyst, they might have fixed it. Please try and let everyone know if these drivers work with Fedora 12. You know where the howto for installation is 😉 How To: Install ATI Catalyst (fglrx) Drivers.

Also, if these drivers doesn’t work, a lot of people are finding mesa-drivers-experimental a huge success over catalyst drivers. Don’t miss those experimental drivers. Checkout comments on Fedora 12 ATI Catalyst Drivers.

Anyway, let us know whatever works for you :)

 

News : ATI Catalyst Graphics Drivers 9.11 Released

Looks like AMD was waiting for Fedora 12 : Constantine release. AMD has released the next version 9.11 of ATI Catalyst Display Drivers. The drivers can be download from ATI Catalyst™ 9.9 Proprietary Linux x86 Display Driver Page. I have downloaded and tested them already on my machine with ATI Radeon HD 3200 (onboard) card with kernel 2.6.29.6-217.2.8.fc11.i586. This version is supposed to work with 2.6.30+ kernels as even 9.10 was working. So, if you have already installed Fedora 12, don’t waste time. Test the drivers and let us know :)

Note1 : Installation Process : How To: Install ATI Catalyst (fglrx) 9.8 Drivers on Fedora 11.
Note2 : Dual Display Configuration : How To: Configure Dual Display with ATI Radeon (fglrx).

 

News : Fedora 12 : Constantine Released [All you need to know]

Much awaited Fedora 12 : Constantine has been released and is available now! This post is more of a collection of things you need to know before you go all the way to download Fedora 12 and install or upgrade.

FAQs

Q. What is Fedora?
A. The Fedora Project page describes it in a short and nice way!

Q. I want to know everything about Fedora 12. Where do I find it?
A. You are probably asking for Fedora 12 Release Notes.

Q. Will it work on my machine?
A. What do you have? A server/desktop/laptop/netbook/xo/some-alien-hardware! It’ll work if your machine satisfies the hardware requirements.

Q. I have been using Fedora since long. What are the new features in Fedora 12?
A. Please browse Fedora 12 : Constantine Feature List page.

Q. Ok. I am convinced. From where can I download Fedora 12?
A. Nice! Please visit Download Page for download options. Checkout torrents or select mirror from Fedora mirrors.

Q. No. I don’t want that regular DVD. Do you have something different to offer?
A. Yup! Spins community is doing a wonderful job! Chose one from KDE, LXDE, XFCE, BrOffice, FEL, Games and Edu spins.

Q. I have downloaded the Fedora ISO. How do I install it?
A. There are different ways in which you can install Fedora on your system.

  1. If you don’t have CD/DVD drive, you can follow How To: Install Fedora without CD or DVD.
  2. You can install Fedora using a USB drive. Checkout LiveUSB creator.
  3. You can follow the traditional way. Install using CD/DVD.

Q. I already have Fedora installed on my system. Should I upgrade or re-install?
A. Browse Upgrading Your Current System page and find out yourself.

Q. I think I want to upgrade my Fedora 11 system to Fedora 12. How do I do it using Yum?
A. Learn how to do it from the Yum Guru himself Yum upgrading to fedora 12 from fedora 11 or browse this page on Fedora Docs.

Q. I have ATI graphics card. How do I install Catalyst Display Drivers?
A. Follow How To: Install ATI Catalyst (fglrx) Drivers.

Q. Hey, I am stuck! I need some help. Where should I ask?
A. There are different ways like Real Time Support via IRC, mailing lists, forums etc. in which you can get help on topics related to Fedora. Browse Get Help page to checkout different methods.

Q. I like this Fedora thing. Can I help?
A. There are several ways in which you can help Fedora Project. The simplest way is to help others! Other methods can be ‘Write Documentation’, ‘Design for Fedora’, ‘Spread the Word’ or ‘Write Code’ :) Checkout Join Fedora page.

 

News : ATI Drivers 9.10 Working with 2.6.30+ Kernels

AMD released the next version 9.10 of its ATI Catalyst display drivers for Linux nearly a fortnight ago. The drivers can be download from ATI Catalyst™ 9.9 Proprietary Linux x86 Display Driver Page. The good thing about this version is that a lot of people are reporting that they can get it working on 2.6.30+ kernels. These drivers are lifesaver for people want to keep everything upto date. The corruption around cursor is still present while watching videos or with compiz enabled.

Note1 : The installation process is same as version 9.8 and can be access at How To: Install ATI Catalyst (fglrx) 9.8 Drivers on Fedora 11.
Note2 : If you want to configure dual display follow How To: Configure Dual Display with ATI Radeon (fglrx).

 

News: ATI Catalyst Display Drivers 9.9 Released

AMD has released the next version 9.9 of its ATI Catalyst display drivers for Linux. The drivers can be download from ATI Catalyst™ 9.9 Proprietary Linux x86 Display Driver Page. I have already tried them with kernel 2.6.29.6-217.2.8.fc11.i586 and they seem to work fine without SWCursor hack. But I still see corruptions around cursor while moving cursor in a playing video or in Compiz. BTW I got dual display working with Xinerama turned on with this version. I’ll post a HowTo about the same very soon. I think it’ll take some more time before the drivers are completely stable. AMD has been doing a really good job in rolling out drivers at regular intervals.

Note : The installation process is same as version 9.8 and can be access at How To: Install ATI Catalyst (fglrx) 9.8 Drivers on Fedora 11.

 

News: Memepress (Yahoo! Meme) WordPress Plugin is out!

Yahoo! Meme is a new Twitter like service in testing by Yahoo!. But its much better than Twitter. It has got facility to post text, photos, video and music. The best thing about Meme is the user interface. I am just loving it. Such a clean interface :) I liked twitter’s web interface very much because it was not cluttered like facebook and others. But meme’s interface is much better than twitter’s interface.

As I felt hooked to it, I thought it’ll be a good idea to have wordpress widget to display latest posts from Yahoo! Meme. I took Twitter for WordPress plugin’s source code and started modifying it to work for Yahoo! Meme and in a few hours, I managed to get a full fledged plugin for Yahoo! Meme and a few extra features and minor bug fixes as well :)

I have named it Memepress. For more details and latest updates about the plugin, please visit plugin homepage on wordpress. The plugin is really easy to setup and doesn’t have any dependencies and doesn’t even need to authenticate with Yahoo! Meme.

Comments/Suggestions?

Note: Yahoo! Meme is still invite only. If you need an account, send me an email using this contact form.

 

Info: ATI Drivers 9.8 Doesnt Work with Fedora 11 (2.6.29+)

After a night out I was about to go to bed when I saw the news that ATI has released a new version of ATI Catalyst™ 9.8 Proprietary Linux x86 Display Driver, its proprietary display drivers for Linux. I immediately downloaded the drivers to test with my Fedora 11 as I am getting more and more desperate to watch HD Movies 😐 Installed them on a manually compiled kernel 2.6.27 and the build failed :( Installed the latest kernel version (for fedora 11) 2.6.29.6.xxx and build failed yet another time. Switched back to 2.6.27 and tried to build again. This time build was successful. Everything worked as expected. I was getting 1500FPS with glxgears and 300FPS with fgl_glxgears. But after sometime display hanged inturn freezing the system. Hard reboot was the only solution and then this happened for a few times in a row. Now, I am back to radeonhd, waiting for yet another release of ATI drivers so that I can try them yet another time to see yet another failure :(

Update : Drivers are working now. Move on to How To: Install ATI Catalyst (fglrx) 9.8 Drivers on Fedora 11.